Servo Motor MG90S((Metal Gears)
MG90S Metal Gear Mini Servo is tiny and lightweight with high output power.The MG90S is an upgrade of the SG90 with even more torque and speed than ever. It also has metal gears which means when the motor is in a jam, the gears aren’t likely to strip. And as a digital servo using a high-speed pulse train, a more detailed configuration is allowed.
You can expect this micro servo to rotate up to 90 degrees. You can expect it to operate the same as standard versions, but this micro servo is much smaller and can fit into tighter spaces. Even though it has metal gears, this tiny little servo weighs only 13.4g, so a good choice for smaller projects.
Each servo comes with 3 arms and screws and with pre-soldered female wires. When using servos, we recommend using pin 9 or 10, a standard in the Servo library.
It's easy to fry servos, make sure you plug it into your brain correctly.
PWM (Signal) is Orange
VCC (Power) is Red
GND (Ground) is Brown
Specifications:
- Weight: 13.4g
- Dimension: 22.8*12.2*28.5mm
- Stall torque: 1.8kg/cm(4.8V )2.2kg/cm(6V)
- Operating speed: 0.1sec/60degree (4.8v), 0.08sec/ 60degree (6v)
- Operating voltage: 4.8-6.0V
- Dead band width: 5us
Servo Motor MG90S((Metal Gears)
MG90S Metal Gear Mini Servo is tiny and lightweight with high output
power.The MG90S is an upgrade of the SG90 with even
more torque and speed than ever. It also has metal gears which means when the
motor is in a jam, the gears aren’t likely to strip. And as a digital servo
using a high-speed pulse train, a more detailed configuration is allowed.
You can expect this micro servo to rotate up
to 90 degrees. You can expect it to operate the same as standard versions, but
this micro servo is much smaller and can fit into tighter spaces. Even though
it has metal gears, this tiny little servo weighs only 13.4g, so a good choice
for smaller projects.
Each servo comes with 3 arms
and screws and with pre-soldered female wires. When using servos, we recommend
using pin 9 or 10, a standard in the Servo library.
It's easy to fry servos, make
sure you plug it into your brain correctly.
PWM (Signal) is Orange
VCC (Power) is Red
GND (Ground) is Brown
Specifications:
- Weight: 13.4g
- Dimension: 22.8*12.2*28.5mm
- Stall torque: 1.8kg/cm(4.8V )2.2kg/cm(6V)
- Operating speed: 0.1sec/60degree (4.8v), 0.08sec/
60degree (6v)
- Operating voltage: 4.8-6.0V
- Dead band width: 5us
Watch this video it will give you a clear idea about this product.