Electronics Parts 
Electrical & Industrial 
Lab Equipment's 
Power Supply 
Gadgets & Gear 
Miscellaneous 
Services 
Recycle Bin 
TFT LCD Display Module 3.2 Inch_ILI9341- 40 Pin
Product Code: DTS002Category: Displays
TFT LCD Display Module 3.2 Inch_ILI9341- 40 Pin
Feature:
Wide viewing angle
LCD touch screen module
With ILI9341 Controller (Update in May 03, 2017)
Compatible 3.3V arduino
Specification:
Resolution ratio: 240 x 320
Size: 3.2 inch
Dimension: 9.4 x 6.1cm(L x W)
Pin - 40
Note:
The control and driving circuit of TFT modules is low voltage and FRIDA micro-power CMOS circuit, can be easily damaged by static, static damage is an irreparable damage, and sometimes human have hundreds of volts of high voltage static electricity, therefore, in handling, assembling and use should be extremely careful to prevent static electricity:
1. Using soldering iron or power FRIDA tools must be well grounded and operation, make them without leakage;
2. Do not use hand to touch the leads, circuit boards and metal boxes;
3. Do not use a vacuum cleaner for cleaning, because it generates strong static electricity;
4. When the air is dry, can also generate static electricity, therefore, workshop humidity shall be above RH60%;
5. If it is necessary to direct contact it , should enable the human body in the same potential with the modules? ,or make human body be well grounded;
6. Remove or back in the bags or move locations, also need to be careful to prevent static electricity. Don't replace or discard the original packing.
Package included:
1 x 3.2 inch TFT LCD display module touch panel
Feature:
Wide viewing angle
LCD touch screen module
With ILI9341 Controller (Update in May 03, 2017)
Compatible 3.3V arduino
Specification:
Resolution ratio: 240 x 320
Size: 3.2 inch
Dimension: 9.4 x 6.1cm(L x W)
Note:
The control and driving circuit of TFT modules is low voltage and FRIDA micro-power CMOS circuit, can be easily damaged by static, static damage is an irreparable damage, and sometimes human have hundreds of volts of high voltage static electricity, therefore, in handling, assembling and use should be extremely careful to prevent static electricity:
1. Using soldering iron or power FRIDA tools must be well grounded and operation, make them without leakage;
2. Do not use hand to touch the leads, circuit boards and metal boxes;
3. Do not use a vacuum cleaner for cleaning, because it generates strong static electricity;
4. When the air is dry, can also generate static electricity, therefore, workshop humidity shall be above RH60%;
5. If it is necessary to direct contact it , should enable the human body in the same potential with the modules? ,or make human body be well grounded;
6. Remove or back in the bags or move locations, also need to be careful to prevent static electricity. Don't replace or discard the original packing.
Package included:
1 x 3.2 inch TFT LCD display module touch panel
Watch this video it will give you a clear idea about this product.
Related Product
