Description: ISD1820
Voice Recording Module:
This
is ISD1820 Recording Module Voice Board With On-Board Mic and Loud Speaker. The
ISD1820 Recording Module Voice Board is the real easy way to add Voice
Recording (and Playback) to your project. The Module can be operated directly
by using the 3 Push-Buttons or with every microcontroller (ex. Arduino).
A
microphone is implemented directly on the board, and you can connect any 8 Ohm
Speaker. Your recordings are saved even without power due to the non-volatile
storage on the ISD1820.
This
module uses the ISD1820 voice record and playback IC to record a single voice
message of up to 10 seconds in length. The recorded message is stored in its
specialized analog flash memory that will keep the message stored even when
power is removed.
The
module includes an electret microphone to record your message and push buttons
to allow for the record, partial playback, or full playback of the message.
Header pins allow for easy interface to a microcontroller and playback can be
controlled with just one digital pin.
Features:
1.An
easy to use 10 seconds of voice recording
2.high-quality,
natural voice restored
3.can
be used as propaganda module
4.with
looping, jog playback, single-pass play function
5.available
single-chip control
6.this
module can directly drive a small speaker 8 ohm 0.5W
Specifications:
Power
supply :3-5V, which can be accessed pin power;
Audio
recording control mode: the key to control or microcontroller, IO has drawn the
line of control;
Buttons
control audio recording method of operation:
REC
button: record button, you can press and hold the recording, release the button
to stop recording;
RLAYE
key: trigger mode playback, press will play this whole speech;
PLAYL
key: jog mode playback, press and hold until playback, release to stop
playback;
RPL
Jumper: loop mode control, loop playback;
FT
Jumper: direct control, microphone voice through the speaker can playback
Package included:
1
x SD1820 Sound Voice Module with speaker
Description: ISD1820
Voice Recording Module:
This
is ISD1820 Recording Module Voice Board With On-Board Mic and Loud Speaker. The
ISD1820 Recording Module Voice Board is the real easy way to add Voice
Recording (and Playback) to your project. The Module can be operated directly
by using the 3 Push-Buttons or with every microcontroller (ex. Arduino).
A
microphone is implemented directly on the board, and you can connect any 8 Ohm
Speaker. Your recordings are saved even without power due to the non-volatile
storage on the ISD1820.
This
module uses the ISD1820 voice record and playback IC to record a single voice
message of up to 10 seconds in length. The recorded message is stored in its
specialized analog flash memory that will keep the message stored even when
power is removed.
The
module includes an electret microphone to record your message and push buttons
to allow for the record, partial playback, or full playback of the message.
Header pins allow for easy interface to a microcontroller and playback can be
controlled with just one digital pin.
Features:
1.An
easy to use 10 seconds of voice recording
2.high-quality,
natural voice restored
3.can
be used as propaganda module
4.with
looping, jog playback, single-pass play function
5.available
single-chip control
6.this
module can directly drive a small speaker 8 ohm 0.5W
Specifications:
Power
supply :3-5V, which can be accessed pin power;
Audio
recording control mode: the key to control or microcontroller, IO has drawn the
line of control;
Buttons
control audio recording method of operation:
REC
button: record button, you can press and hold the recording, release the button
to stop recording;
RLAYE
key: trigger mode playback, press will play this whole speech;
PLAYL
key: jog mode playback, press and hold until playback, release to stop
playback;
RPL
Jumper: loop mode control, loop playback;
FT
Jumper: direct control, microphone voice through the speaker can playback
Package included:
1
x SD1820 Sound Voice Module with speaker
Watch this video it will give you a clear idea about this product.