All in One Arduino,Node MCU & Microcontroller Based IoT Trainer Board.
Product Code: ZTS001Arduino,Node MCU,Microcontroller IoT Trainer Board for students to increase skills.Student will be able to perform electronics,robotics,Arduino,microcontroller,IoT experiment.
All in One Arduino,Node MCU & Microcontroller Based IoT Trainer Board.
ছাত্র-ছাত্রীদের ব্যবহার উপযোগী এবং দক্ষতা অর্জনের জন্য একটি ভালোমানের আরডুইনো,মাইক্রোকন্ট্রোলার,আই ও টি ট্রেইনার বোর্ড এটি।এটি এমন ভাবে তৈরী করা হয়েছে যাতে ছাত্র-ছাত্রীরা নিজের মতো করে আরডুইনো,মাইক্রোকন্ট্রোলার,আই ও টি ,বেসড কাজ শিখতে পারে।
এই ট্রেইনার বোর্ড এর মাধ্যমে একজন ছাত্র-ছাত্রী ইলেকট্রনিক্স ,রোবোটিক্স,আরডুইনো,মাইক্রোকন্ট্রোলার,আই ও টি প্রোগ্রামিং এবং বিভিন্ন প্রজেক্টের এক্সপেরিমেন্ট করতে পারবে খুব সহজে।
Product Specification and Details:
Arduino,Node
MCU,Micro-controller IoT Trainer Board for students to increase skills. Student
will be able to perform electronics, robotics, Arduino, micro-controller and
IoT experiment to very easily. Here inside this trainer Solderless bread board we have used
bread board for extra convenience so it is possible to make it practical by
arranging different circuits as desired. In a Word it is a full All in One Arduino & Node
MCU Based Microcontroller IoT Trainer Board.
Controller: 1. Arduino Nano - 1P 2.
PIC (PIC16F873) - 1P & AVR Micro-controller (ATmega
328p) -1P. 3.
Node MCU, ESP8266, IoT. Body - Frame: 1) Top part is high
quality PCB print from china. 2) Frame made with
acrylic. 3) Color: Red 4)
Dimension:11.5in * 10.5in Power Supply: 1)
DC Power Supply 220Vinput 5V Output. 2)
Volt Meter. 3)
On/Off Switch. 4)
5V and 3.3V DC Output |
|
Input: 1.
Different Type of Sensors,5/7 Types.(You can use more as
you need.) 2.
Toggle & Push Switch. 3.
Variable Resistor/Pot. 4.
IR Sensor. Output: 1. LCD
Display (20*4)- 1P 2. Dot
Matrix Display (8*8)- 1P. 3. Seven
Segment Display 1P. 4. LED
- 6P. 5. Buzzer
- 1P. 6. Relay
- 1P. 7. Triac 8. L293D
Dual H-Bridge Motor Driver. Package Including: 1. Main Trainer Board 1x. 2. Different Sensor. 5x1. 3. Arduino Nano x1. 4. Node Mcu x1. 5. User Manual x1. |
Experiments that can be done:
l All kinds of micro-controller based experiment
can be done here.
l All kinds of Arduino based work/Project
Experiment can be done here.
l All kinds of IoT Based work/Project
Experiment can be done here.
l Different types of sensor interfacing.
l Various type of display output checking.
l Different types of Input output Experiment
can be done here.
l In this trainer board you can built and
tested any project/circuit before building a final Project.
[ N.B: Product specification not fixed, the customer may change specification as their own
desire.]
All in One Arduino,Node MCU & Microcontroller Based IoT Trainer Board.
ছাত্র-ছাত্রীদের ব্যবহার উপযোগী এবং দক্ষতা অর্জনের জন্য একটি ভালোমানের আরডুইনো,মাইক্রোকন্ট্রোলার,আই ও টি ট্রেইনার বোর্ড এটি।এটি এমন ভাবে তৈরী করা হয়েছে যাতে ছাত্র-ছাত্রীরা নিজের মতো করে আরডুইনো,মাইক্রোকন্ট্রোলার,আই ও টি ,বেসড কাজ শিখতে পারে।
এই ট্রেইনার বোর্ড এর মাধ্যমে একজন ছাত্র-ছাত্রী ইলেকট্রনিক্স ,রোবোটিক্স,আরডুইনো,মাইক্রোকন্ট্রোলার,আই ও টি প্রোগ্রামিং এবং বিভিন্ন প্রজেক্টের এক্সপেরিমেন্ট করতে পারবে খুব সহজে।
Product Specification and Details:
Arduino,Node MCU,Micro-controller IoT Trainer Board for students to increase skills. Student will be able to perform electronics, robotics, Arduino, micro-controller and IoT experiment to very easily. Here inside this trainer Solderless bread board we have used bread board for extra convenience so it is possible to make it practical by arranging different circuits as desired. In a Word it is a full All in One Arduino & Node MCU Based Microcontroller IoT Trainer Board.
Controller: 1. Arduino Nano - 1P 2. PIC (PIC16F873) - 1P & AVR Micro-controller (ATmega 328p) -1P. 3. Node MCU, ESP8266, IoT. Body - Frame: 1) Top part is high quality PCB print from china. 2) Frame made with acrylic. 3) Color: Red 4) Dimension:11.5in * 10.5in Power Supply: 1) DC Power Supply 220Vinput 5V Output. 2) Volt Meter. 3) On/Off Switch. 4) 5V and 3.3V DC Output |
| Input: 1. Different Type of Sensors,5/7 Types.(You can use more as you need.) 2. Toggle & Push Switch. 3. Variable Resistor/Pot. 4. IR Sensor. Output: 1. LCD Display (20*4)- 1P 2. Dot Matrix Display (8*8)- 1P. 3. Seven Segment Display 1P. 4. LED - 6P. 5. Buzzer - 1P. 6. Relay - 1P. 7. Triac 8. L293D Dual H-Bridge Motor Driver. Package Including: 1. Main Trainer Board 1x. 2. Different Sensor. 5x1. 3. Arduino Nano x1. 4. Node Mcu x1. 5. User Manual x1. |
Experiments that can be done:
l All kinds of micro-controller based experiment can be done here.
l All kinds of Arduino based work/Project Experiment can be done here.
l All kinds of IoT Based work/Project Experiment can be done here.
l Different types of sensor interfacing.
l Various type of display output checking.
l Different types of Input output Experiment can be done here.
l In this trainer board you can built and tested any project/circuit before building a final Project.
[ N.B: Product specification not fixed, the customer may change specification as their own desire.]
Watch this video it will give you a clear idea about this product.