BT151-600R Thyristors SCR
Product Code: CMF020BT151-600R Thyristors SCR
BT151-600R Thyristors
The BT151 is a medium power 12A silicon-controlled rectifier that comes in a TO-220 package that can be used to switch medium power AC/DC loads and can handle high DC pulses.
Pin configuration
Pin number: | Pin name: | Pin description: |
1 | Cathode | Conventional current flows out of the cathode. |
2 | Anode | Conventional current flows into the anode. |
3 | Gate | Controls conduction between the anode and cathode. |
4 | Tab | Electrically connected to the anode. |
Features of BT151 SCR
- Maximum anode-cathode voltage (off state): 650V
- Maximum RMS current: 12A
- Pulsed DC current: 120A
- Gate trigger current: 15mA max.
- Holding current: 20mA max.
- Latching current: 40mA max.
- Available in the TO-220AB package.
Note: Complete Technical Details can be found in the BT151 SCR datasheet present at the end of this page.
BT151 Equivalent SCRs: BT152, TYN208, 2N6508
Other SCRs: BTA16, BTB12600B, S6010
BT151 SCR Overview
The BT-151 is a medium power SCR used for power switching. SCRs are like transistors but have the ability to latch, i.e. stay on once triggered, even if the gate signal is removed. They stay in conduction till the anode-cathode current drops below a certain value called the holding current. SCRs in many ways behave like diodes with similar forward drops, hence the name ‘controlled rectifier’.
BT151-600R Thyristors
The BT151 is a medium power 12A silicon-controlled rectifier that comes in a TO-220 package that can be used to switch medium power AC/DC loads and can handle high DC pulses.
Pin configuration
Pin number: | Pin name: | Pin description: |
1 | Cathode | Conventional current flows out of the cathode. |
2 | Anode | Conventional current flows into the anode. |
3 | Gate | Controls conduction between the anode and cathode. |
4 | Tab | Electrically connected to the anode. |
Features of BT151 SCR
- Maximum anode-cathode voltage (off state): 650V
- Maximum RMS current: 12A
- Pulsed DC current: 120A
- Gate trigger current: 15mA max.
- Holding current: 20mA max.
- Latching current: 40mA max.
- Available in the TO-220AB package.
Note: Complete Technical Details can be found in the BT151 SCR datasheet present at the end of this page.
BT151 Equivalent SCRs: BT152, TYN208, 2N6508
Other SCRs: BTA16, BTB12600B, S6010
BT151 SCR Overview
The BT-151 is a medium power SCR used for power switching. SCRs are like transistors but have the ability to latch, i.e. stay on once triggered, even if the gate signal is removed. They stay in conduction till the anode-cathode current drops below a certain value called the holding current. SCRs in many ways behave like diodes with similar forward drops, hence the name ‘controlled rectifier’.
Watch this video it will give you a clear idea about this product.