Nokia 5110 LCD Display
Pin Configuration:
Pin No: | Pin Name: | Description |
1 | Reset | This pin resets the module. It an active low pin (resets when 0V is provided) |
2 | Chip Enable (CE) | This pin is made low (0V) to select this particular display when more than one SPI peripherals are used. |
3 | Data/Command (DC) | This pin is used to switch between Data mode (high) and Command mode (low) |
4 | Serial Input (DIN) | This is the input pin (MOSI) through which serial instructions are sent |
5 | Clock (CLK) | All SPI modules require a common clock, this clock source is supplied to this pin |
6 | Power (Vcc) | This pin is used to power the display the supply voltage is from 2.7V to 3.3V |
7 | Back Light (BL) | This pin powers the backlight of the display (3.3V maximum). |
8 | Ground (Gnd) | Connects to the ground of the circuit. |
Features of Nokia5110 LCD module:
- Operating Voltage is 2.7V to 3.3V
- Current consumption is 6mA
- Consists of 84 rows and 84 columns (84×48) monochrome pixels
- Works using SPI interface
- Consists of Philips PCD8544 interface chip for easy interfacing
- Can be easily interfaced with Arduino
- Supports decent graphics of bitmap images
- Available in Green and Blue Backlight
Nokia 5110 LCD Display
Nokia 5110 LCD Display
Pin Configuration:
Pin No: | Pin Name: | Description |
1 | Reset | This pin resets the module. It an active low pin (resets when 0V is provided) |
2 | Chip Enable (CE) | This pin is made low (0V) to select this particular display when more than one SPI peripherals are used. |
3 | Data/Command (DC) | This pin is used to switch between Data mode (high) and Command mode (low) |
4 | Serial Input (DIN) | This is the input pin (MOSI) through which serial instructions are sent |
5 | Clock (CLK) | All SPI modules require a common clock, this clock source is supplied to this pin |
6 | Power (Vcc) | This pin is used to power the display the supply voltage is from 2.7V to 3.3V |
7 | Back Light (BL) | This pin powers the backlight of the display (3.3V maximum). |
8 | Ground (Gnd) | Connects to the ground of the circuit. |
Features of Nokia5110 LCD module:
- Operating Voltage is 2.7V to 3.3V
- Current consumption is 6mA
- Consists of 84 rows and 84 columns (84×48) monochrome pixels
- Works using SPI interface
- Consists of Philips PCD8544 interface chip for easy interfacing
- Can be easily interfaced with Arduino
- Supports decent graphics of bitmap images
- Available in Green and Blue Backlight
Watch this video it will give you a clear idea about this product.